Edwardian Fireplaces: UK Fireplace manufacturers and stockists of original Edwardian style fireplaces, mantles, tiles and accessories.

re018

The Edwardian Arch

A period recreation of a classic Edwardian tiled arched fireplace.

The fireplace insert complements a number of ourEdwardian style mantles
but any of these mantles can be manufactured to surround any fireplace insert.

These insert designs are shown at 40"square but they can be manufactured
at any size if necessary. We offer a complete bespoke service
where each fireplace is manufactured to a customers requirements.

Tiled fireplace including hearth and fret from

standard £825

This insert is also available with our special hand dipped fireplace tiles.
These fireplace tiles are hand dipped in the glaze and fired at
different angles in the kiln to recreate an authentic look.

With its slip cast opening blocks to the fireplace opening this insert is made in
exactly the same way as the original fireplaces from 1910 to 1930 and are
indistinguisable from them.

hand dipped + £160

To burn sold fuel a stool grate is also required.
Living flame gas fires are also available to suit these fireplaces.

All tiled products are manufactured in Manchester at our factory/showroom site

Different opening tiles are not available for this fireplace.

Hearth sizes
Originally most pre-war fireplaces would have had hearths laid flush with the wooden floor.
In general they were about 48" wide and 18" deep. Current gas and solid fuel regulations
now stipulate that a 2"(50mm) raised hearth is required.

Our hearths can me made in large sizes so that the mantle stands on it, small so that the mantle
stands on the floor or somewhere in between (either the mantle or the hearth is cut out).
The standard sizes are small (39.5" x 16"in 4"tiles) and large( 54"x15") in 6"tiles
but they can be made in any size or shape on request.

To order this fireplace or mantel
telephone +44 (0) 161 42 990 42
Credit Card Orders accepted

Back to Edwardian Fireplace menu