A Fireplace hearth is a fire-resistant area placed around a fire.

The Decorative Hearth sits over the constructional hearth and is usually made from stone, slate or ceramic tiles. It must cover the constuctional hearth if floorboards are exposed.

Slabbing
Slabbing is the method of filling the underneath of the hearth with reinforced concrete. This provides a stable base for the tiles.

Slabbed Glazed Tiled Hearths are available in a range of colours in high quality glazed ceramics - suitable for all types of fuel including gas and solid fuels. These hearths are available in flat back and in tongued back models.

An 8 tile glazed hearth with a kick or tongued back made from 6" tiles.

Glazed Fireplace Tiles are high quality"double-fired" tiles available in 4" or 6" sizes in the following colours

Standard Sizes
The standard size is 54" x 15" x2" thick with or without a kick
(a tongue extending back) £145 in 6 inch tiles

Other sizes are available, just ask for a price.

A 36" flat back Ivory Tiled Hearth made from 4" tiles that will fit between the legs of a mantel. Our hearths can be sized to fit between the legs or large enough so that the mantel will sit completely on top of it.

Standard Tiled Hearths have round edges on the returns

Here the hearth fits between mantel legs and has a different coloured pad that matches the opening tiles of the fireplace

The C20 Fires Kerbed Hearth

A kerbed hearth made from 4"x4" tiles with round edges on both sides and our own special corner tile with an internal reveal.

Standard size 54"x15" £251

Edwardian fenders

In Edwardian times the fenders would commonly sit over a hearth flush with the floor and cover the gap between it and the floorboards.

Our Edwardian style fenders are made from 6"x3" tiles with 3"x3" inch corners. A hearth can be incorporated in the middle if required

These fenders can be made to any size in any of our standard tile colours.

An example fender of 48" x 13" is £175

Victorian Kerbed Hearths

These hearths with shaped edge tiles are suitable for Late Victorian and Edwardian Fireplaces and are available in our standard colours

Standard Size 54" x 15" £312

Chamfered Edge Kerbed Hearth

A style more typical of the 1930s, 1940s and 1950s these chamfered edge hearths use our special corner tiles and are available in all our standard colours.

54" x 15" standard £289

Hearths made from cut tiles

Tiles can be cut from 4" or 6" tiles to make patterned hearths. Cross Bonded Hearths are a typical Edwardian feature and are available made from 6"x2" and 6"x3" tiles. Originally these cross bonded style hearths would be laid flush with the floor but have adapted them to be 2" high to comply with gas regulations.

A Glazed Cross Bonded Brick Effect Hearth
made from 6" x 2" cut tiles
Standard size 54"x15" £225

Herringbone Hearths

Our glazed tiles can be also be cut to make herringbone patterned hearths available in all our usual tile colours.

Herringbone Hearth made from 6" x 2" cut tiles
can also be made from 6" x 3" cut tiles

Standard size 54" x 15" £285

Hearth Variations

Glazed Easy Clean Hearth
Glazed fireplaces can be made with a snout nosed front typical of 1950s fireplaces that prevents ash from falling forwards but has no hard to clean corners. add £50

The Easy Clean Hearth can have an optional central pad. It is also available without the stripe at the front of the hearth.

Heatplates

Our hearths can also be made with a cental heatplate
steel with a brass finish heatlpte shown here
(also available in brushed steel or black)

Hearth with Heatplate in Brass or Steel add £15.00

Shape and detail variations

Hearths can be made with stepped fronts to match fireplace shoulder steps and with stripes or piping. Price on application